NEC MultiSync EA231WMi User Manual

Also see for MultiSync EA231WMi: User manual User manual Specifications Specifications Product dimensions

Contents

English-10Hole of “ ” markPlease assemblethen together8. Reverse this process to re-attach stand.NOTE: Use only VESA-compatible alternative mounting method.Handle with care when removing stand.NOTE: Match “TOP SIDE” mark on stand to top side of the monitor head whenre-attaching stand.Flexible Arm InstallationThis LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm:1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand.2. Using the 4 screws from the stand removal, attach the arm to the monitor (Figure F.1).NOTE: 1. When mounting, use ONLY the screws (4 pcs) that were removed from the stand to avoid damage to the monitoror stand.2. The LCD monitor should only be used with an approved arm (e.g. GS mark). To meet the safety requirements,the monitor must be mounted to an arm, which guaranties the necessary stability under consideration of theweight of the monitor.3. The mounting stand must be able to sustain at least 23.2 kg and be UL certified.Thickness of Bracket (Arm)2.0~3.2 mmWeight of LCD assembly: 5.8 kg MAX100 mmFigure F.14 Screws (M4)(Max Depth: 8.5 mm)100 mmAn additional 4 VESA holes are provided for those users needing a lower monitor head position, than that available from themonitor stand in shipping configuration.The monitor stand can be re-attached using the 4 screws to the lower position VESA holes.NOTE: 1. The monitor head tilt function may have impaired operation when attached to the lower position VESA holes.2. The monitor head pivot function should not be used when attached to the lower position VESA holes.“TOP SIDE” markPlease match top sideof the monitorAdditional 4 VESA