NEC MultiSync EA242WU User Manual

English−13EnglishParts Oame and FunctionsControl PanelItem Function1 Ambient Light SensorHuman SensorDetects the level of ambient lighting and the presence of a user, allowing the monitor to make adjustments tovarious settings resulting in a more comfortable viewing experience. Do not cover this sensor.2 INPUT/SELECT Enters sub-menus in the OSD menu when the OSD menu is open.Shows a switching menu for the input source when the OSD menu is closed.You can directly change to the [L/B] (LOW BLUE LIGHT) mode by touching this key for 3 seconds or more whenthe OSD menu is closed.*13 MENU/EXIT Opens the OSD menu. Closes the OSD sub-menus and main menu. You can restore the saved settings in the[CUSTOMIZE SETTING] by touching this key for 3 seconds or more when the OSD menu is closed.4 LEFT/RIGHT/UP/DOWN*2When the OSD menu is open, navigates through the OSD menu.When the OSD menu is closed, touch one of the following keys to open the menu for the function indicated.*1key: [BRIGHTNESS]key: [VOLUME]5 ECO/RESET When the OSD menu is open, this key sends a reset command for the OSD settings.When the OSD menu is closed, this key switches the [ECO MODE] status. You can set a mode from [OFF], [1]and [2].*16 ⏻ Turns the monitor on and off.7 Power LED Indicates that the power is on or off.*1: When the [HOT KEY] function is [OFF], this function is disabled.*2: Depending on the [OSD ROTATION] setting, [LEFT], [RIGHT], [UP] and [DOWN] key guides are displayed at the , , , keys differently (see page 42).