NEC MultiSync EA243WM User Manual

Also see for MultiSync EA243WM: Specifications User manual Specifications Specifications Setup manual

Contents

English-11EnglishControlsOSD (On-Screen Display) control keys on the front of the monitor functionare as follows:To access OSD menu, touch any of the control keys.To change signal input, touch the SELECT key.NOTE: Exit OSD in order to change signal input.1 Ambibright SensorHuman SensorDetects the level of ambient lighting, allowing the monitor to make adjustments to varioussettings resulting in a more comfortable viewing experience. Do not cover this sensor.2 LED Indicates that the power is on or off.3 Power Turns the monitor on and off.4 INPUT/SELECT Enters the OSD Control menu. Enters OSD sub menus.Changes the input source when not in the OSD Control menu.5 MENU/EXIT Accesses OSD menu. Exits the OSD sub menu. Exits OSD Control menu.6 LEFT/RIGHT Navigates to the left or right through the OSD Control menu.You can adjust the BRIGHTNESS directly while the OSD menu is off*.7 UP/DOWN Navigates up or down through the OSD Control menu.You can adjust the VOLUME directly when not in the OSD Control menu*.8 RESET/ECO Resets the OSD back to factory settings in the OSD control menu.Switches among ECO MODE settings.Activates Auto Adjust function if helded for 3 seconds while the OSD menu is off (Analog inputonly)*.* When Hot Key function is OFF, this function is disabled.ECO TOOLSBRIGHTNESSAdjusts the overall image and background screen brightness.If ECO MODE is set to 1 or 2, a bar for CARBON FOOTPRINT will appear.CONTRASTAdjusts the overall image and background screen brightness by input signal level.ECO MODEDecreases the amount of power consumption by reducing the brightness level.OFF: No function.1 (ENERGY STAR SETTING): Sets brightness variable range from 0% to 80% (EA243WM)/from 0% to 70%(EA273WM).This setting can adjust brightness to a range in which power is reduced to meet Energy Star measurement conditions.2 (40% POWER SAVINGS - EA243WM) (50% POWER SAVINGS - EA273WM): Sets brightness variable range from0% to 40%.This setting can adjust brightness to a range in which power is reduced by 40% (EA243WM)/50% (EA273WM)compared to the maximum brightness setting.When this function is set to ON, a CARBON FOOTPRINT bar will appear alongside the brightness adjustment bar.NOTE: This function is disabled when DV mode is set for Dynamic.