NEC MultiSync EA271F User Manual

English-102. Mount Flexible ArmThis LCD monitor is designed for use with a flexible arm.1. Follow the instructions on how to Remove the Monitor Stand for Mounting.2. Using 4 screws that meet the specifications listed below, attach the arm to the monitor (Figure F.1).Figure F.1100 mm100 mmThickness of Bracket (Arm)2.0~3.2 mm12 mmSpring washerFlat washerCAUTION: • Only use 4 M4 sized screws when mounting to avoid damage to the monitor and stand.• To fulfill the safety requirements, the monitor must be mounted to an arm, which guaranties the necessarystability under consideration for the weight of the monitor. The LCD monitor should only be used with anapproved arm (e.g. TUEV GS mark).• Tighten all screws (recommended Fasten Force: 98 - 137N•cm).A loose screw may cause the monitor to fall off the arm.