NEC MultiSync FE700+ User Manual

Contents

NEC MultiSync FE700+ User Manual Manual pdf 8 page image

6Controls –continuedColor Control/AccuColor ® Control SystemColor presets selects the desired color setting. The bar is replaced by the colorsetting choice. Each color setting is adjusted at the factory to the stated Kelvin. Ifa setting is adjusted, the name of the setting will change from Kelvin to Customexcept sRGB mode.Red, Green, Blue: AccuColor Control System decreases or increases themonitor's red, green or blue color guns depending upon which is selected. Thechange in color will appear on screen and the direction (decrease or increase)will be shown by the bars.sRGB mode: sRGB mode provides the suitable color managed picture image. Youcan not change Red, Green and Blue colors, brightness and contrast individually.Geometry ControlsGeometry Controls MenuThe Geometry controls allow you to adjust the curvature or angle of the sides ofyour display.Sides In/Out (pincushion): Decreases or increases the curvature of the sides eitherinward or outward.Sides Left/Right (pincushion balance): Decreases or increases the curvature ofthe sides either to the left or right.Sides Tilt (parallelogram): Decreases or increases the tilt of the sides either to theleft or right.Sides Align (trapezoidal): Decreases or increases the bottom of the screen to bethe same as the top.Rotate (raster rotation): Rotates the entire display clockwise or counterclockwise.Tools 1Moiré Canceler: Moiré is a wavy pattern which can sometimes appear on the screen.The pattern is repetitive and superimposed as rippled images. When running certainapplications, the wavy pattern is more evident than in others. To reduce moiré, adjustthe level by using –/+ CONTROL buttons.Factory Preset: Selecting Factory Preset allows you a reset most OSM™ controlsettings back to the factory settings. A warning statement will appear to confirmthat you do want to reset ALL settings. Individual settings can be reset by high-lighting the control to be reset and pressing the RESET button.Tools 2Language: OSM controls menus are available in 6 languages.OSM Position: You can choose where you would like the OSM controls menu toappear on your screen. Selecting OSM Position allows you to manually adjust theOSM controls menu position from among Center, Top left, Top right, Bottom leftand Bottom right.MSFE700+.wpc 11/22/00, 2:16 PM8