NEC MultiSync FP955 User Manual

Also see for MultiSync FP955: User manual

Contents

NEC MultiSync FP955 User Manual Manual pdf 7 page image

OSM™ (On-Screen Manager) control buttons on the front of themonitor function as follows:To change DVI/D-SUB signal input, press the RESET button.NOTE: OSM must be closed in order to change the DVI/D-SUB signal input.Main Menu Sub-MenuEXIT Exits the OSM menu. Exits to the OSM controlsmain menu.CONTROL Moves the highlighted Moves the highlighted area/ area up/down to select up/down to select one of theone of the controls. controls.CONTROL Moves the highlighted Moves the bar in the – or +–/+ area left/right to select direction to decrease orone of the controls. increase the adjustment.PROCEED Has no function. Only executes controlor enters sub, sub-menu.RESET Resets all the controls within Resets the highlighted controlthe highlighted menu to the factory setting.to the factory setting.NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear allowingyou to cancel the reset function.When OSM controls are activated, icons are displayed at the top of the menu.If an arrow (➔) is displayed in a sub-menu, it indicates further choices areavailable. To enter a sub-menu, press PROCEED.Brightness/Contrast ControlsBrightness: Adjusts the overall image and background screen brightness.Contrast: Adjusts the image brightness in relation to the background.Degauss: Eliminates the buildup of stray magnetic fields which alter the correctscan of the electron beams and affect the purity of the screen colors, focus andconvergence. When activated, your screen image will jump and waver a bit asthe screen is demagnetized.Caution: Please allow a minimum of 20 minutes to elapse between uses of the Degauss Control.Size and Position ControlsLeft/Right: Moves the image horizontally (left or right).Down/Up: Moves the image vertically (up or down).Narrow/Wide: Decreases or increases the horizontal size of the image.Short/Tall: Decreases or increases the vertical size of the image.5ControlsFP955.wpc 1/23/01, 12:13 PM7