6edoM edoM edoM edoM edoM noituloseR noituloseR noituloseR noituloseR noituloseR .qerF.H .qerF.H .qerF.H .qerF.H .qerF.H)zHK( )zHK( )zHK( )zHK( )zHK(htdiWdnaB htdiWdnaB htdiWdnaB htdiWdnaB htdiWdnaB)zHM( )zHM( )zHM( )zHM( )zHM(ytiraloP ytiraloP ytiraloP ytiraloP ytiraloPHHHHH VVVVV1 AGV 053x027 07 zH 74.13 223.82 + -2 AGV 004x027 07 zH 74.13 223.82 - +3 AGV 084x046 06 zH 74.13 571.52 - -4 CAM 084x046 66 zH 00.53 42.03 - -5 ASEV 084x046 27 zH 68.73 5.13 - -6 ASEV 084x046 57 zH 05.73 5.13 - -7 ASEV 006x008 65 zH 61.53 0.63 + +8 ASEV 006x008 06 zH 88.73 0.04 + +9 ASEV 006x008 57 zH 88.64 5.94 + +01 ASEV 006x008 27 zH 80.84 0.05 + +11 CAM 426x238 57 zH 27.94 382.75 - -21 ASEV 867x4201 06 zH 63.84 0.56 - -31 ASEV 867x4201 07 zH 84.65 0.57 - -41 ASEV 867x4201 57 zH 20.06 57.87 + +Preset ModesTo reduce the need for adjustment for different modes, the monitor has default settingmodes that are most commonly used as given in the table below. For optimum adjustment,the user is suggested to perform the Auto Setup under Windows “Full Screen” pattern. Whennone of the mode is matched, the user can store their preferred modes in the user modes.The monitor is capable of storing up to 9 user modes. The only condition to store as a usermode is the new display information must have 1 kHz difference for horizontal frequency or1 Hz for vertical frequency or the sync signal polarities are different from the defaultmodes.LCD1515Controls15151715manual042502.p65 4/25/03, 12:09 PM6