NEC MultiSync LCD1530V User Manual

NEC MultiSync LCD1530V User Manual Manual pdf 8 page image

6Quick Start –continuedTiltGrasp both sides of the monitor screen with your handsand adjust the tilt as desired (Figure TS.1).Remove Monitor Stand for MountingTo prepare the monitor for alternate mounting purposes:1. Remove the connector cover, hinge coverand cable cover (Figure R.1).2. Disconnect all cables.3. Place monitor facedown on a non-abrasive surface ( placethe screen on a 32 mmplatform so that hole ofstand match to screwlocation).(Figure R.2).4. Remove the 4 screwsconnecting themonitor to the standand lift off the stand assembly(Figure R.2) the monitor is now readyfor mounting in an alternate manner.5. Connect the AC cord and signalcable to the back of the monitor.6. Reverse this process toreattach stand.Figure TS.1Figure R.1Figure R.2Screws32mmPush Push0.9.25, 5:13 PM8