NEC MultiSync LCD1530V User Manual

Contents

NEC MultiSync LCD1530V User Manual Manual pdf 7 page image

English-6Quick StartTo attach the MultiSync LCD monitor to your system, follow theseinstructions:1. Turn off the power to your computer.2. For the PC: Connect the 15-pin mini D-SUB of the appropriatesignal cable to the connector of the display card in your system(Figure A.1). Tighten all screws.For the Mac: Connect the MultiSync LCD1530V Macintosh cableadapter to the computer (Figure B.1). Attach the 15-pin mini D-SUBend of the appropriate signal cable to the MultiSync LCD1530VMacintosh cable adapter (Figure B.1). Tighten all screws.Remove connector cover and cable cover on back of monitor(Figure E.1).3. Connect the 15-pin mini D-SUB of the video signal cable to theappropriate connector on the back of the monitor (Figure C.1).NOTE: Incorrect cable connections may result in irregularoperation, damage display quality/components of LCDmodule and/or shorten the module’s life.4. Connect one end of the power cord to the MultiSync LCD Seriesmonitor and the other end to the power outlet. Place the video signalcable and AC power cord under the clips. (Figure C.1).Replace connector cover and cable cover. (Figure E.1)NOTE: Adjust the position of the cable under the clips to avoiddamage for cable or monitor.5. Turn on the monitor (Figure D.1) and the computer.6. To complete the setup of your MultiSync LCD monitor, use thefollowing OSM controls:• Auto Adjust Contrast• Auto AdjustRefer to the Controls section of this User’s Manual for a full descriptionof these OSM controls.NOTE: If you have any problems,please refer to theTroubleshooting section of this User’s Manual.NOTE: For easy removal of the cable cover or signal cable, placethe monitor face down. (Figure R.2)