NEC MultiSync LCD1560VM User Manual

Also see for MultiSync LCD1560VM: User manual

English-8Colour Control SystemsSix colour presets select the desired colour setting (sRGB and NATIVE colour presets are standard andcannot be changed).R, G, BIncreases or decreases Red, Green or Blue colour depending upon which is selected. The change in colourwill appear on screen and the direction (increase or decrease) will be shown by the bars.sRGBsRGB mode dramatically improves the colour fidelity in the desktop environment by a single standard RGBcolour space. With this colour supported environment, the operator could easily and confidentlycommunicate colours without further colour management overhead in the most common situations.NATIVEOriginal colour presented by the LCD panel that is unadjustable.ToolsLANGUAGEOSM control menus are available in seven languages.OSM POSITIONYou can choose where you would like the OSM control image to appear on your screen. Selecting OSMLocation allows you to manually adjust the position of the OSM control menu left, right, down or up.OSM TURN OFFThe OSM control menu will stay on as long as it is use. In the OSM Turn Off submenu, you can select howlong the monitor waits after the last touch of a button to shut off the OSM control menu. The preset choicesare 10, 20, 30, 45, 60 and 120 seconds.OSM LOCK OUTThis control completely locks out access to all OSM control functions without Mute, Sound volume,Brightness and Contrast. When attempting to activate OSM controls while in the Lock Out mode, a screenwill appear indicating the OSM controls are locked out. To activate the OSM Lock Out function, pressSELECT, then “+” key and hold down simultaneously. To de-activate the OSM Lock Out, press SELECT,then “+” key and hold down simultaneously.RESOLUTION NOTIFIERThis optimal resolution is 1024 x 768. If ON is selected, a message will appear on the screen after30 seconds, notifying you that the resolution is not at 1024 x 768.HOT KEYYou can adjust the sound volume and brightness directly. When this function is set to ON, you can adjustthe sound volume with + or - , brightness with < or > key, while the OSM menu is off. The standard OSMmenu can be accessed with the EXIT button.OFF TIMERMonitor will automatically power-down when the end user has selected a pre-determined amount of time.FACTORY PRESETSelecting Factory Preset allows you to reset all OSM control settings back to the factory settings. TheRESET button will need to be held down for several seconds to take effect. Individual settings can be resetby highlighting the control to be reset and pressing the RESET button.InformationDISPLAY MODEIndicates the current display resolution and frequency setting of the monitor.MONITOR INFO.Indicates the model and serial numbers of your monitor.01_English 16/10/02, 5:17 pm8