NEC MultiSync LCD175VXM User Manual

Also see for L174F1: User manual

9Controls –continuedOSM® Warning: OSM Warning menus disappear with SELECT button.NO SIGNAL: This function gives a warning when there is no signal present.After power is turned on or when there is a change of input signal or videois inactive, the No Signal window will appear.RESOLUTION NOTIFIER: This function gives a warning of use with optimizedresolution. After power is turned on or when there is a change of input signalor the video signal doesn’t have proper resolution, the Resolution Notifierwindow will open. This function can be disabled in the TOOL menu.OUT OF RANGE: This function gives a recommendation of the optimizedresolution and refresh rate. After the power is turned on or there is a changeof input signal or the video signal doesn’t have proper timing, the Out OfRange menu will appear.EXITSelecting EXIT allows you exit OSM menu/sub menu.LANGUAGEOSM control menus are available in seven languages.OSM TURN OFFThe OSM control menu will stay on as long as it is in use. In theOSM Turn OFF submenu, you can select how long the monitorwaits after the last touch of a button to shut off the OSM controlmenu. The preset choices are 10 - 120 seconds in 5 second inter-vals.OSM LOCK OUTThis control completely locks out access to all OSM control func-tions without Brightness and Contrast. When attempting to activateOSM controls while in the Lock Out mode, a screen will appearindicating the OSM are locked out. To activate the OSM Lock Outfunction, press “1<->2 / RESET“, then “+“ key and hold downsimultaneously. To de-activate the OSM Lock Out, press “1<->2 /RESET“, then “+“ key and hold down simultaneously.RESOLUTION NOTIFIERIf ON is selected, a message will appear on the screen after 30seconds, notifying you that the resolution is not at optimal resolution.MONITOR INFOIndicates the model and serial numbers of your monitor.