NEC MultiSync LCD1760NX LCD1760NX LCD1760NX User Manual

Also see for MultiSync LCD1760NX: Brochure & specs User manual Dimensional drawing User manual

NEC MultiSync LCD1760NX LCD1760NX LCD1760NX User Manual Manual pdf 14 page image

English-8FINEImproves focus, clarity and image stability by increasing or decreasing this setting.Should the “Auto Adjust function” and the “H.Size” function do not give you a satisfactory picture setting, afine tuning can be performed using the “Fine” function. It improves focus, clearity and image stability byincreasing or decreasing this setting.For this a Moiré test pattern could be used. If the Fine value is wrongly calibrated, the result would look likeon the left drawing. The image should be homogeneous.Colour Control SystemsSix colour presets select the desired colour setting (NATIVE colour presets are standard and cannot bechanged).R, G, BIncreases or decreases Red, Green or Blue colour depending upon which is selected. The change in colourwill appear on screen and the direction (increase or decrease) will be shown by the bars.sRGBsRGB mode dramatically improves the colour fidelity in the desktop environment by a single standard RGBcolour space. With this colour supported environment, the operator could easily and confidentlycommunicate colours without further colour management overhead in the most common situations.NATIVEOriginal colour presented by the LCD panel that is unadjustable.ToolsLANGUAGEOSM control menus are available in seven languages.OSM POSITIONYou can choose where you would like the OSM control image to appear on your screen. Selecting OSMLocation allows you to manually adjust the position of the OSM control menu left, right, down or up.OSM TURN OFFThe OSM control menu will stay on as long as it is use. In the OSM Turn Off submenu, you can select howlong the monitor waits after the last touch of a button to shut off the OSM control menu. The preset choicesare 10, 20, 30, 45, 60 and 120 seconds.OSM LOCK OUTThis control completely locks out access to all OSM control functions without Brightness and Contrast.When attempting to activate OSM controls while in the Lock Out mode, a screen will appear indicating theOSM controls are locked out. To activate the OSM Lock Out function, press SELECT, then “+” key and holddown simultaneously. To de-activate the OSM Lock Out, press SELECT, then “+” key and hold downsimultaneously.RESOLUTION NOTIFIERThis optimal resolution is 1280 x 1024. If ON is selected, a message will appear on the screen after30 seconds, notifying you that the resolution is not at 1280 x 1024.HOT KEYYou can adjust the brightness and contrast directly. When this function is set to ON, you can adjust thebrightness with < or >, contrast with + or - key, while the OSM menu is off. The standard OSM menu canbe accessed with the EXIT button.When FINE value iswrong.When FINE value iscorrect.01_English 14/11/02, 1:39 pm8