NEC MultiSync LCD1760NX User Manual

Contents

8Controls –continuedAccuColor ® Control SystemsAccuColor ® Control Systems: Six color presets select the desired color setting(sRGB and NATIVE color presets are standard and cannot be changed).R,G,B: Increases or decreases Red, Green or Blue color depending upon whichis selected. The change in color will appear on screen and the direction(increase or decrease) will be shown by the bars.NATIVE: Original color presented by the LCD panel that is unadjustable.sRGB: sRGB mode dramatically improves the color fidelity in the desktopenvironment by a single standard RGB color space. With this color supportedenvironment, the operator could easily and confidently communicate colorwithout further color management overhead in the most common situations.ToolsLANGUAGE: OSM® control menus are available in seven languages.OSM Position: You can choose where you would like the OSM controlimage to appear on your screen. Selecting OSM Location allows you tomanually adjust the position of the OSM control menu left, right, down or up.OSM TURN OFF: The OSM control menu will stay on as long as it is in use. Inthe OSM Turn Off submenu, you can select how long the monitor waits afterthe last touch of a button to shut off the OSM control menu. The preset choicesare 10, 20, 30, 45, 60 and 120 seconds.OSM LOCK OUT: This control completely locks out access to all OSM controlfunctions without Brightness and Contrast. When attempting to activateOSM controls while in the Lock Out mode, a screen will appear indicatingthe OSM controls are locked out. To activate the OSM Lock Out function,press SELECT, then “+” key and hold down simultaneously. To de-activate theOSM Lock Out, press SELECT, then “+” key and hold down simultaneously.RESOLUTION NOTIFIER: This optimal resolution is 1280 x 1024. If ON isselected, a message will appear on the screen after 30 seconds, notifying youthat the resolution is not at 1280 x 1024.HOT KEY: You can adjust the brightness and contrast directly. When thisfunction is set to ON, you can adjust the brightness with < or > , contrast with +or - key, while the OSM menu is off.OFF TIMER: Monitor will automatically power-down when the end user hasselected a pre-determined amount of time.FACTORY PRESET: Selecting Factory Preset allows you to reset all OSM controlsettings back to the factory settings. The RESET button will need to be helddown for several seconds to take effect. Individual settings can be reset byhighlighting the control to be reset and pressing the RESET button.LCD1760NX.p65 11/4/02, 1:33 PM8