NEC MultiSync LCD1800 User Manual

Also see for MultiSync LCD1800: Specifications Brochure & specs Product dimensions User guide

Contents

NEC MultiSync LCD1800 User Manual Manual pdf 11 page image

- 1-8 -3.2.3 Connecting to Two ComputersFigure 7 shows the signal cable connection to two com-puters.1. Power off, the monitor and the computers.2. Connect the one end of the equipped signal cable tothe 15-pin connector on a computer.3. Prepare signal cable. (For the signal cable, contactyour dealer.)Connect the D-SUB-15P male connector of the sig-nal cable to the 15-pin connector on the monitor andother end to the computer.4. Power on the monitor, then the computers.5. After using the system, power off the monitor, thenthe computers.ComputerD-SUB-15PD-SUB-15PSignal CableFigure 7ComputerApple MacintoshComputerSignal Cable3.2.2 Connecting to An Apple Macintosh ComputerFigure 6 shows the signal cable and Macintosh Adapter tothe video port in an Apple Macintosh.1. Power off, both the monitor and the computer.2. Connect the 15-pin (D-SUB-15P) end of the MacintoshAdapter to the straight 15-pin connector on theMacintosh video port on the computer or on the videoboard.3. Connect the sub-miniature 15-pin (D-SUB-15P) endof the Macintosh Adapter to the signal cable.4. Power on the monitor, then the Macintosh.5. After using the system, power off the monitor, then theMacintosh.For the Apple Macintosh Computers having a VGA com-patible port, steps 2 through 4 are not necessary. Connectthe one end of the signal cable to the port directly.Figure 6Macintosh Adapter