16Monitor MultiSync ® LCD2010 ™ NotesSpecifications MonitorLCD Module Diagonal: 20.1 inch Active matrix; thin film transistor (TFT)Viewable Image Size: 20.1 inch liquid crystal display (LCD); 0.31 mm dotNative Resolution (Pixel Count): Landscape: 1280 x 1024 pitch; XtraView ™ technology; 150cd/m 2 whitePortrait: 1024 x 1280 luminence; 220:1 contrast ratio, typicalInput Signal Video: ANALOG 0.7 Vp-p/75 OhmsSync: Separate sync. TTL LevelHorizontal sync. Positive/NegativeVertical sync. Positive/NegativeComposite sync. (Positive/Negative) (TTL Level)Sync on Green video (Positve) 0.7 Vp-p and sync.Negative 0.3 Vp-pDisplay Colors Analog input: Unlimited number of Colors Depends on display card used.Synchronization Range : Horizontal: 24.0 kHz to 80 kHz AutomaticallyVertical: 56.0 Hz to 76 Hz AutomaticallyResolutions Supported Landscape: 720 x 400*: VGA text640 x 480 at 60Hz to 76Hz800 x 600* at 56Hz to 76Hz832 x 624* at 75Hz1024 x 768* at 60Hz to 76Hz1280 x 960 at 60Hz to 76Hz1280 x 1024 at 60Hz to 76Hz .................. NEC cites recommended resolution atPortrait: 480 x 640 at 60Hz to 76Hz 60Hz for optimal display performance.600 x 800* at 56Hz to 76Hz624 x 832* at 75Hz768 x 1024* at 60Hz to 76Hz960 x 1280 at 60Hz to 76Hz1024 x 1280 at 60Hz to 76Hz .................. NEC cites recommended resolution at60 Hz for optimal display performance.Active Display Landscape: Horizontal: 399 mm/15.7 inchesArea Vertical: 319mm/12.6 inchesPortrait: Horizontal: 319 mm/12.6 inchesVertical: 399 mm/15.7 inchesPower Supply AC 100 – 120 V/220 – 240 V, 50/60 HzCurrent Rating 1.0A @ 100 – 120 V/0.5A @ 220 – 240 VDimensions Lanscape: 498 mm (W) x 501 mm (H) x 246 mm (D)19.6 inches (W) x 19.7 inches (H) x 9.7 inches (D)Portrait: 418 mm (W) x 541 mm (H) x 246 mm (D)16.5 inches (W) x 21.3 inches (H) x 9.7 inches (D)Height Adjustment: 80 mm/3.1 inchesWeight 11.0 kg24.3 lbsEnvironmental ConsiderationsOperating Temperature: 5°C to +30°C/41°F to 86°FHumidity: 30% to 80%Altitude: 0 to 10,000 FeetStorage Temperature: -10°C to +60°C/14°F to 140°FHumidity: 10% to 85%Altitude: 0 to 45,000 Feet* Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appearchoppy or lines may appear to be bold. This is normal and necessary for all current flat panel technologies when displayingnon-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expandresolutions to full screen, an interpolation of the resolution must be done. When the interpolated resolution is not an exactmultiple of the native resolution, the mathematical interpolation necessary may cause some lines to appear thicker than others.NOTE: Technical specifications are subject to change without notice.Specifications cont.78133813.wpc 10/28/99, 3:22 PM18