NEC MultiSync LCD1850E User Manual

Also see for NEC MultiSync LCD1850E LCD1850E LCD1850E: User manual Specifications User manual

Contents

NEC MultiSync LCD1850E User Manual Manual pdf 13 page image

11SpecificationsMonitor MultiSync ® LCD1850E™ NotesSpecifications MonitorLCD Module Diagonal: 18.1 inch Active matrix; thin film transistor (TFT)Viewable Image Size: 18.1 inch liquid crystal display (LCD); 0.28 mm dotNative Resolution (Pixel Count): 1280x1024 pitch; 200cd/m2 white luminence;350:1 contrast ratio, typicalInput Signal Video: ANALOG 0.7 Vp-p/75 OhmsSync: Separate sync. TTL LevelHorizontal sync. Positive/NegativeVertical sync. Positive/NegativeComposite sync. Positive/NegativeSync on Green (Video 0.7p-p and Sync Negative 0.3V p-p)Display Colors Analog input: 16,777,216 Depends on display card used.Synchronization Horizontal: 31.0 kHz to 82 kHz AutomaticallyRange Vertical: 55.0 Hz to 85 Hz AutomaticallyImage Formation Time 50ms (Typ.) 70ms (Max.)Resolutions Supported Landscape: 720 x 400* 1 :VGA text Some systems may not support640 x 480* 1 at 60 Hz to 85 Hz all modes listed.800 x 600* 1 at 56 Hz to 85 Hz832 x 624* 1 at 75 Hz1024 x 768* 1 at 60 Hz to 85 Hz NEC-Mitsubishi Electronics Display cites1152 x 870* 1 at 75Hz recommended resolution at 60 Hz for1280 x 1024 at 60 Hz to 75 Hz ................. optimal display performance.Active Display Area Horiz. : 359 mm/14.1 inchesVert. : 287 mm/11.3 inchesPower Supply AC 100 - 120 V/ 220-240 V @ 50/60 HzCurrent Rating 0.8 A @ 100–120 V, 0.4 A @ 220-240 VDimensions 398 mm (W) x 436 mm (H) x 215 mm (D)15.7 inches (W) x 17.2 inches (H) x 8.5 inches (D)Weight 8.6 kg19.0 lbsEnvironmental ConsiderationsOperating Temperature: 5°C to 35°C/41°F to 95°FHumidity: 30% to 80%Feet: 0 to 12,000 FeetStorage Temperature: -10°C to 60°C/14°F to 140°FHumidity: 10% to 85%Feet: 0 to 53,300 Feet* 1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This isnormal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, eachdot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.NOTE: Technical specifications are subject to change without notice.