NEC MultiSync LCD1960NX User Manual

Also see for LCD1960NX - MultiSync - 19" LCD Monitor: Brochure & specs Dimensions User manual

NEC MultiSync LCD1960NX User Manual Manual pdf 13 page image

11Monitor MultiSync® LCD1960NX ™ NotesSpecifications MonitorLCD Module Diagonal : 19.0 inch Active matrix; thin film transistor (TFT)Viewable Image Size : 19.0 inch liquid crystal display (LCD); 0.294 mm dotNative Resolution (Pixel Count) : 1280 x 1024 pitch; 250cd/m2 white luminence;600:1 contrast ratio, typicalInput Signal Video : ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVISync : Separate sync. TTL LevelHorizontal sync. Positive/NegativeVertical sync. Positive/NegativeDisplay Colors 16,777,216 Dependent on display card used.Maximum Left/Right : 85°/85°Viewing Angles Up/Down : 85°/85°Synchronization Horizontal : 31.5 kHz to 81.1 kHz (Analog) AutomaticallyRange 31.5 kHz to 69.0 kHz (Digital) AutomaticallyVertical : 56.0 Hz to 75.0 Hz AutomaticallyResolutions Supported 720 x 400* 1 :VGA text Some systems may not support all modes listed.640 x 480* 1 @ 60 Hz to 75 Hz800 x 600* 1 @ 56 Hz to 75 Hz832 x 624* 1 @ 75 Hz1024 x 768 @ 60 Hz to 75 Hz1152 x 864 @ 75 Hz1280 x 1024 @ 60 Hz to 75 Hz (Analog) ....... NEC-Mitsubishi Electronics Display cites1280 x 1024 @ 60 Hz (Digital) recommended resolution at 60 Hz foroptimal display performance.Active Display Area Horizontal : 376.3 mm/14.8 inchesVertical : 301.1 mm/11.9 inchesPower Supply 100 – 240 V ~ 50/60 HzCurrent Rating 0.75 – 0.4ADimensions 416.3 mm (W) x 388.7-498.7 mm (H) x 190 mm (D)16.4 inches (W) x 15.3-19.6 inches (H) x 7.5 inches (D)Weight 7.8 kg17.2 lbsEnvironmental ConsiderationsOperating Temperature : 5°C to 35°C/41°F to 95°FHumidity : 30% to 80%Feet : 0 to 12,000 FeetStorage Temperature : -10°C to 60°C/14°F to 140°FHumidity : 10% to 85%Feet : 0 to 40,000 Feet* 1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This isnormal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, eachdot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.NOTE: Technical specifications are subject to change without notice.SpecificationsLCD1960NX050603.p65 5/21/03, 1:07 PM11