NEC MultiSync LCD1970NX LCD1970NX LCD1970NX User Manual

Also see for MultiSync LCD1970NX: Specifications Specifications Specifications Brochure & specs Specifications

Contents

NEC MultiSync LCD1970NX LCD1970NX LCD1970NX User Manual Manual pdf 10 page image

English-8ControlsOSM (On-Screen Manager) control buttons on the front of the monitorfunction as follows:To access OSM menu, press any of the control buttons (MENU/EXIT, Left, Right, Down, Up).To change signal input, press the SELECT button.To change DV MODE, press the RESET button.NOTE: OSM must be closed in order to change signal input.NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear allowing you to cancel theRESET function by pressing the MENU/EXIT button.Brightness/Contrast ControlsBRIGHTNESSAdjusts the overall image and background screen brightness.CONTRASTAdjusts the image brightness in relation to the background.DV MODEAlows you to select the suitable setting for Movie, Picture and etc.AUTO CONTRAST (Analog input only)Adjusts the image displayed to optimal settings.Auto Adjust (Analog input only)Automatically adjusts the Image Position, H. Size and Fine settings.Image Controls (Analog input only)LEFT / RIGHTControls Horizontal Image Position within the display area of the LCD.DOWN / UPControls Vertical Image Position within the display area of the LCD.H.SIZEAdjusts the horizontal size by increasing or decreasing this setting.FINEImproves focus, clarity and image stability by increasing or decreasing this setting.4-Direction-Key UpDownRightLeftMenuOpen OSM main menu. Exits the OSM controls.Exits to the OSM main menu.ButtonMENU/EXITLeft/RightDown/UpSELECTRESETMoves the highlighted area left/right to select control menus.Moves the bar left/right to increase or decrease the adjustment.Moves the highlighted area down/up to select one of the controls.Active Auto Adjust function. Enter the OSM sub menu.Resets the highlighted control menu to the factory setting.