49AppendixIf you need detailed information about the controls, please use the advanced menu.• Turn off your monitor.• Turn on your monitor by pushing the "POWER" and "SELECT" button at the same time forat least one second simultaneously.• You will see the Advanced menu.This menu is larger than the normal OSM.• Turn off and restart your monitor in the normal way.To make an adjustment, ensure that the tag is highlighted, then press "SELECT."To move to another tag, press "EXIT," then press " " or " " to highlight another tag.Tag1 BrightnessContrastAuto Black Level(Analog input only)Black Level(Analog input only)Adjusts the image brightness and contrast in relation to the background. Press"+" or "-" to adjust.Auto Contrast(Analog input only)Adjusts the image displayed for non-standard video inputs. Press "SELECT" toadjust. Any adjustment requires the image to have white portions.Auto Brightness This function adjusts the brightness automatically for the best CONTRAST andBRIGHTNESS setting based on the white display area.Tag2 R-H. position Adjusts the position of the red component of the image. Press "+" or "-" to(Analog input only) adjust.G-H. position Adjusts the position of the green component of the image. Press "+" or "-" to(Analog input only) adjust.B-H. position Adjusts the position of the blue component of the image. Press "+" or "-" to(Analog input only) adjust.R-SHARPNESS Adjusts the sharpness of the red component of the image. Press "+" or "-" to(Analog input only) adjust.G- SHARPNESS Adjusts the sharpness of the green component of the image. Press "+" or "-" to(Analog input only) adjust.B- SHARPNESS Adjusts the sharpness of the blue component of the image. Press "+" or "-" to(Analog input only) adjust.Tag3 Signal(Analog input only)Automatic adjustment levelAuto SW Determines the automatic adjustment level for Auto Adjust. The choices are(Analog input only) "SIMPLE", "FULL" and "DETAIL". Press "+" or "-" to select. See table below.SIMPLE XFULL XDETAIL"Size" "Fine""Position"OOOXOO O1.5 seconds2 seconds10 to 20 secondsDetermines when the automatic adjustment is activated. The choices are "OFF","SIMPLE" and "FULL". Press "+" or "-" to select.Adjusts the overall image and screen background brightness. Press "+" or "-" to adjust.Automatically adjusts the black level. Press "SELECT" to adjust.Manually adjusts the black level. Press "+" or "-" to adjust.New signal Re-input "H-size" "Fine" "H/V-Position" ContrastOFFSIMPLEFULLX * XO * XOOO O * *SignalSettingInput Signal Adjustment ItemsO : Automatic adjustment is performed on adjustments marked with *.X : Automatic adjustment is not performed.NOTE: Automatic adjustment does not work at a resolution lower than 800x600.O : Automatic adjustment is performed.X : Automatic adjustment is not performed.*1: Black level, RGB sharpness, RGB delay and RGB position are adjusted using Long Cable Software (included).Time"Contrast" Black level,Long cable capability *1
