NEC MultiSync LCD1990SXi User Manual

Also see for L195RR: User manual User manual

EnglishEnglish-11OFF TIMERMonitor will automatically power-down when the end user has selected a pre-determined amount of time.Before powering off, a message will appear on the screen asking the user if they want to delay the turn off timeby 60 minutes. Press any OSD button to delay the turn off time.OFF MODEThis function allows the monitor to enter into a power saving mode after a period of inactivity.It has three settings.OFF: Monitor does not go into power save mode when the input signal is lost.STANDARD: Monitor enters power save mode automatically when the input signal is lost.OPTION: Monitor enters power save mode automatically when the amount of surrounding light goes below the levelthat is determined by the user. The level can be adjusted in Tag 7 of the Advanced OSD Control menu.When in power save mode, the LED on the front of the monitor blinks amber. While in power save mode, push any ofthe front buttons, except for POWER and SELECT to return to normal.When the amount of surrounding light returns to normal levels, the monitor will automatically return to normal mode.MURACOMPThis function electronically compensates for the slight variations in the white uniformity level, as well as fordeviations in color that may occur throughout the display area of the screen. These variations are characteristic ofLCD panel technology. This function improves the colour and evens out the luminance uniformity of the display.NOTE: Using the MURACOMP feature reduces the overall peak luminance of the display. If greater luminance isdesired over the uniform performance of the display, then MURACOMP should be turned off.MENU ToolsLANGUAGEOSD control menus are available in eight languages.OSD LEFT/RIGHTYou can choose where you would like the OSD control image to appear on your screen. Selecting OSD Locationallows you to manually adjust the position of the OSD control menu left or right.OSD DOWN/UPYou can choose where you would like the OSD control image to appear on your screen. Selecting OSD Locationallows you to manually adjust the position of the OSD control menu Up or Down.OSD TURN OFFThe OSD control menu will stay on as long as it is use. You can select how long the monitor waits after the last touchof a button to shut off the OSD control menu. The preset choices are 10-120 seconds by 5 seconds step.OSD LOCK OUTThis control completely locks out access to all OSD control functions. When attempting to activate OSD controlswhile in the Lock Out mode, a screen will appear indicating the OSD controls are locked out.There are four types of OSD LOCK OUT:OSD LOCK OUT with BRIGHTNESS and CONTRAST control: To activate the OSD Lock Out function, pressSELECT, then “UP” button and hold down simultaneously. To deactivate the OSD Lock Out, press SELECT, then“UP” button and hold down simultaneously while in the OSD menu. BRIGHTNESS and CONTRAST can be adjustedwhile in the lock out mode.OSD LOCK OUT with no control: To activate the OSD Lock Out function, press SELECT, then “Right” button andhold down simultaneously. To deactivate the OSD Lock Out, press SELECT, then “Right” button and hold downsimultaneously while in the OSD menu. No controls can be adjusted while in the lock out mode.OSD LOCK OUT with BRIGHTNESS (only) control: To activate the OSD Lock Out function, press SELECT, then“Down” and “Left” buttons and hold down simultaneously. To deactivate the OSD Lock Out, press SELECT, then“Down” and “Left” buttons and hold down simultaneously while in the OSD menu. BRIGHTNESS can be adjustedwhile in the lock out mode.CUSTOM: Refer to the Advanced OSD Menu.OSD TRANSPARENCYAdjusts the transparency of the OSD Menu.OSD COLOR“Tag window frame color”, “Item select color” and “Adjust window frame color” can be changed to Red, Green, Blue,or Gray.