NEC MultiSync LCD2060NX User Manual

Also see for L203FQ: User manual User manual

Contents

NEC MultiSync LCD2060NX User Manual Manual pdf 9 page image

English-8FINEImproves focus, clarity and image stability by increasing or decreasing this setting.Should the “Auto Adjust function” and the “H.Size” function do not give you a satisfactory picture setting, afine tuning can be performed using the “Fine” function. It improves focus, clearity and image stability byincreasing or decreasing this setting.For this a Moiré test pattern could be used. If the Fine value is wrongly calibrated, the result would look likeon the left drawing. The image should be homogeneous.Colour Control SystemsSix colour presets select the desired colour setting (NATIVE colour presets are standard and cannot bechanged).R, G, BIncreases or decreases Red, Green or Blue colour depending upon which is selected. The change in colourwill appear on screen and the direction (increase or decrease) will be shown by the bars.sRGBsRGB mode dramatically improves the colour fidelity in the desktop environment by a single standard RGBcolour space. With this colour supported environment, the operator could easily and confidentlycommunicate colours without further colour management overhead in the most common situations.NATIVEOriginal colour presented by the LCD panel that is unadjustable.Tools 1SHARPNESSThis function is digitally capable to keep crisp image at any timings. It is continuously adjustable to getdistinct image or soft one as you prefer, and set independently by different timings.The number of adjustment steps is different depending on whether EXPANSION Mode is OFF, FULL orASPECT (1600 x 1200 is OFF Mode).EXPANSION MODESets the zoom method.FULL: The image is expanded to 1600 x 1200, regardless of the resolution.ASPECT: The image is expanded without changing the aspect ratio.OFF: The image is not expanded.OFF TIMERMonitor will automatically power-down when the end user has selected a pre-determined amount of time.When FINE value iswrong.When FINE value iscorrect.