NEC MultiSync LCD2070NX User Manual

Contents

NEC MultiSync LCD2070NX User Manual Manual pdf 8 page image

English-6Figure S.1Remove Monitor Stand for MountingTo prepare the monitor for alternate mounting purposes:1. Place hands on each side of the monitor and lift up to the highest position. Remove the cable cover (Figure S.1).NOTE: If you have difficulty removing the cable cover, please push the lower opening upward to remove it,as shown in the figure beside.2. Disconnect all cables.3. Place monitor face down on a non-abrasive surface (Figure S.2).NOTE: Handle with care when monitor facing down, for avoiding the damage to the front buttons.4. Remove the 2 screws connecting the stand to the monitor (Figure S.2).Figure RL.1Raise and Lower Monitor ScreenThe monitor may be raised or lowered. To raise or lower screen, place hands on each side of the monitor and lift or lower tothe desired height (Figure RL.1).NOTE: Handle with care when raising or lowering the monitor screen.Tilt and SwivelGrasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1).NOTE: Handle with care when tilting and swivelling the monitor screen.Figure TS.1Figure S.2