NEC MultiSync LCD2070WNX User Manual

Also see for L205GX: User manual

Contents

NEC MultiSync LCD2070WNX User Manual Manual pdf 3 page image

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROMWALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWERCORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTSINSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to causeelectric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.This symbol alerts the user that important literature concerning the operation and maintenance of thisunit has been included. Therefore, it should be read carefully in order to avoid any problems.WARNINGCAUTIONCanadian Department of Communications Compliance StatementDOC: This Class B digital apparatus meets all requirements of the CanadianInterference-Causing Equipment Regulations.C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulationsaccording to CAN/CSA C22.2 No. 60950-.FCC Information. Use the attached specified cables with the MultiSync® LCD2070WNX™ (L205GX) colormonitor so as not to interfere with radio and television reception.() Please use the supplied power cord or equivalent to ensure FCC compliance.(2) Please use the supplied shielded video signal cable. Please use the supplied USBcable with ferrite cores.Use of other cables and adapters may cause interference with radio and televisionreception.2. This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 5 of the FCC Rules. These limits are designed to provide reason-able protection against harmful interference in a residential installation. This equipmentgenerates, uses, and can radiate radio frequency energy, and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.• Consult your dealer or an experienced radio/TV technician for help.If necessary, the user should contact the dealer or an experienced radio/television techni-cian for additional suggestions. The user may find the following booklet, prepared by theFederal Communications Commission, helpful: ”How to Identify and Resolve Radio-TVInterference Problems.“ This booklet is available from the U.S. Government Printing Office,Washington, D.C., 20402, Stock No. 004-000-00345-4.TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USETHIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGSCAN BE FULLY INSERTED.REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICINGTO QUALIFIED SERVICE PERSONNEL.