NEC MultiSync LCD2470WNX, LCD2470WVX User Manual

Also see for LCD2470WNX - MultiSync - 24" LCD Monitor: Specifications Brochure & specs Dimensions User manual Specifications

Contents

NEC MultiSync LCD2470WNX, LCD2470WVX User Manual Manual pdf 14 page image

12DDC/CI: Tuns on or off the two-way communication between the graphics card andthe monitor. With DDC/CI turned on, some monitor settings can be adjusted throughthe graphics card using a computer.FACTORY PRESET: Selecting Factory Preset allows you to reset all OSD control set-tings back to the factory settings. The RESET button will need to be held down forseveral seconds to take effect. Individual settings can be reset by highlighting thecontrol to be reset and pressing the RESET button.Menu ToolsLANGUAGE: OSD ® control menus are available in eight languages.OSD LEFT/RIGHT: You can choose where you would like the OSD controlimage to appear horizontally on your screen.OSD DOWN/UP: You can choose where you would like the OSD control image toappear vertically on your screen.OSD TURN OFF: The OSD control menu will stay on as long as it is in use. In theOSD Turn Off submenu, you can select how long the monitor waits after the lasttouch of a button to shut off the OSD control menu.OSD LOCK OUT: This control completely locks out access to all OSD control functionsexcept Brightness and Contrast. When attempting to activate OSD controls while inthe Lock Out mode, a screen will appear indicating the OSD controls are locked out.To activate the OSD Lock Out function, press SELECT, then right control button andhold down simultaneously. To deactivate the OSD Lock Out, press SELECT, then leftcontrol button and hold down simultaneously while in the OSD menu.RESOLUTION NOTIFIER: If this option is ON, a message will appear on the screenafter 30 seconds notifying the user that the optimal resolution is not being used. Theoptimal resolution is 1920 x 1200.InformationThe Information menu indicates the current input, display resolution, horizontal andvertical frequency, and polarity settings of the monitor. The model and serial numbersof your monitor are also indicated.OSD ® Warning: OSD Warning menus disappear with Exit button.NO SIGNAL: This function gives a warning when there is no signal present.After power is tuned on or when there is a change of input signal or video is inac-tive, the No Signal window will appear.RESOLUTION NOTIFIER: This function gives a warning if a resolution other thanthe optimal resolution is used. After power is turned on or when there is a change ofinput signal or the video signal doesn’t have proper resolution, the Resolution Notifierwindow will open. This function can be disabled in the Menu Tools.OUT OF RANGE: This function gives a recommendation of the optimizedresolution and refresh rate. After the power is turned on or there is a change of inputsignal or the video signal does not have proper timing, the Out Of Range menu willappear.• For Advanced Menu options for the see page 19.Controls - continued