NEC MultiSync LCD2470WNX User Manual

Also see for LCD2470WNX - MultiSync - 24" LCD Monitor: Specifications Brochure & specs User manual Dimensions User manual

NEC MultiSync LCD2470WNX User Manual Manual pdf 15 page image

3Safety Precautions and MaintenanceFOR OPTIMUM PERFORMANCE, PLEASE NOTETHE FOLLOWING WHEN SETTING UP AND USINGTHE MULTISYNC ® LCD COLOR MONITOR:• DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening orremoving covers may expose you to dangerous shock hazards or other risks. Refer all servicing toqualified service personnel.• Do not spill any liquids into the cabinet or use your monitor near water.• Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltagepoints, which can be harmful or fatal or may cause electric shock, fire or equipment failure.• Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.• Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall,causing serious damage to the monitor.• When operating the MultiSync LCD monitor with its AC 25-240V power supply, use a powersupply cord that matches the power supply voltage of the AC power outlet being used. The powersupply cord you use must have been approved by and comply with the safety standards of yourcountry. (Type H05VV-F should be used in Europe)• In UK, use a BS-approved power cord with molded plug having a black (5A) fuse installed for usewith this monitor. If a power cord is not supplied with this monitor, please contact your supplier.• Do not place any objects onto the monitor and do not use the monitor outdoors.• The lamps in this product contain mercury. Please dispose according to state,local, or federal law.• Do not bend power cord.• Do not use monitor in high temperatured, humid, dusty, or oily areas.• Do not cover vent on monitor.Immediately unplug your monitor from the wall outlet and refer servicing to qualified service person-nel under the following conditions:• When the power supply cord or plug is damaged.• If liquid has been spilled, or objects have fallen into the monitor.• If the monitor has been exposed to rain or water.• If the monitor has been dropped or the cabinet damaged.• If the monitor does not operate normally by following operating instructions.• If glass is broken, handle with care.• If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.• Allow adequate ventilation around the monitor so that heat can properly dissipate. Donot block ventilated openings or place the monitor near a radiator or other heatsources. Do not put anything on top of monitor.• The power cable connector is the primary means of detaching the system from thepower supply. The monitor should be installed close to a power outlet which is easily accessible.• Handle with care when transporting. Save packaging for transporting.Image PersistencePlease be aware that LCD Technology may experience a phenomenon known as Image Persistence.Image Persistence occurs when a residual or “ghost” image of a previous image remains visible onthe screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant im-ages being displayed for a long period of time should be avoided.To alleviate image persistence, turn off the monitor for as long as the previous image was displayed.For example, if an image was on the monitor for one hour and a residual image remains, the monitorshould be turned off for one hour to erase the image.As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying movingimages and using a moving screen saver at regular intervals whenever the screen is idle or turning offthe monitor when not in use.Recommended UseCAUTION