NEC MultiSync LCD3215 User Manual

Also see for LCD3215 - MultiSync - 32" LCD Flat Panel Display: User manual Specifications Quick start guide Installation guide Control guide

NEC MultiSync LCD3215 User Manual Manual pdf 9 page image

English-7English7 DOWN ( ) buttonActivates the OSD menu when the OSD menu is turned-off.Acts as button to move the highlighted area down toselect adjustment items within OSD menu.8 EXIT buttonActivates the OSD menu when the OSD menu is turned-off.Acts as EXIT button within the OSD to move to previousmenu.9 Remote control sensor and Power IndicatorReceives the signal from the remote control (when using thewireless remote control). See also page 9.Glows green when the LCD monitor is in active mode.Glows red when the LCD is in POWER OFF mode.When the LCD monitor is in POWER SAVE mode, it willglow both green and red. When SCHEDULE is enabled, itwill blink green and glow red. See page 19. When acomponent failure is detected within the monitor, theindicator will blink red.10 Main Power SwitchOn/Off switch to turn main power ON/OFF. See also page 18.Control Key Lock ModeThis control completely locks out access to all Control Keyfunctions. To activate the control key lock function, press bothand and hold down simultaneously for more than3 seconds. To resume user mode, press both and andhold simultaneously for more than 3 seconds.1 POWER button ( )Switches the power on/off. See also page 18.2 MUTE buttonSwitches the audio mute ON/OFF.3 INPUT buttonActs as SET button within OSD menu. Toggle switchesbetween [RGB1], [RGB2], [RGB3], [DVD/HD], [VIDEO(S)] or[VIDEO].4 PLUS (+) buttonActs as (+) button to increase the adjustment with OSD menu.Increases the audio output level when the OSD menu isturned off.5 MINUS (-) buttonActs as (-) button to decrease the adjustment with OSD menu.Decreases the audio output level when the OSD menu isturned off.6 UP ( ) buttonActivates the OSD menu when the OSD menu is turned-off.Acts as button to move the highlighted area up to selectadjustment items within OSD menu.Control PanelParts Name and FunctionsOFF ON