NEC MultiSync LCD3735WXM User Manual

NEC MultiSync LCD3735WXM User Manual Manual pdf 12 page image

LCD 3735WXM E-3-+In OutUsing the remote controlPoint the remote control toward the sensor on the front of the monitor when pressing buttons.Use the remote control within a distance of about 7m/23ft. from the front of the LCD monitor's remotecontrol sensor and at a horizontal and vertical angle of within 30 degrees within a distance of about 3m/10ft.Cautions regarding use of remote control∑ Do not expose the remote control to shock.In addition, do not expose the remote control to liquids, and do notplace in an area with high humidity.∑ Do not install or place the remote control under direct sunlight. Theheat may cause deformation of the unit.∑ The remote control may not work properly if the remote sensorwindow of the LCD unit is under direct sunlight or strong lighting.In such a case, change the angle of the lighting or LCD, or operatethe remote control closer to the remote sensor window.Installing batteries in the remote controlIf the remote control fails to operate the LCD color TV functions, replace the batteries.1. Open the battery cover.Slide back and remove the battery cover.2. Installing the batteries.Install two size AAA batteries (included).Align the +, - on the batteries to the +, - on the remote.3. Close the battery cover.Replace the battery cover in the dirction ofthe arrow and snap it back into place.Cautions regarding batteriesImproper use of batteries can result in a leakage of chemicals and / or explosion. Be sure to follow theinstructions below.∑ Place battery with their terminals corresponding to the (+) and (-) as marked on the remote control. Ifinserted in the wrong direction, the batteries could explode or leak, resulting in fires, physical injury, orstains.∑ Different types of batteries have different characteristics. Do not mix batteries of different types.∑ Do not mix new and old batteries together. The batteries could explode or leak, resulting in fires,physical injury, or stains.∑ Remove batteries when they become weak.∑ The battery supplied with the product may have a shorter life expectancy due to storage conditions.∑ If the remote control is not used for an extended period of time, remove the batteries.