NEC MultiSync LT81 User Manual

Also see for LT100 - MultiSync XGA DLP Projector: Compatibility chart Installation data User manual

NEC MultiSync LT81 User Manual Manual pdf 14 page image

Remote Control FeaturesYou can use your wireless remote control to operate your MultiSync LT81/LT100 Projector. With the remote mouse receiver connected to your computer,you can also use the projector’s remote control to operate your computer. (Seepages 53 to 56 to connect the remote mouse receiver to your computer.)NOTE: If you are using a Macintosh computer, you can click either the right orleft button to activate the mouse.1 Left Click ButtonUse this button to enter your menu selection. It works the same as the"Enter" button on the cabinet.2 Laser PointerBeams a laser light when “Laser” button is pressed.3 Infrared TransmitterDirect the remote control toward the remote sensor on the projector cabinetor the remote mouse receiver.4 LEDFlashes when any button is pressed.25MAGNIFY SLIDE VOLUMEPOSITION FREEZEPIC-MUTEOFFVIDEOMENU LASERR-CLICKRGB PC CARDS-VIDEOONPOWER+-+ ++- --45678 9101325 Power On And OffIf your main power switch is turned on, you can use these buttons to turnyour MultiSync LT81/LT100 Projector on and off.6 Video ButtonPress to select an NTSC, PAL, SECAM or NTSC4.43 compatible videosource from a VCR, DVD player, laser disc player or document camera.7 S-Video ButtonPress to select an S-Video source from a VCR or other S-Video source.8 RGB ButtonPress to select a video source from a computer connected to your RGB port.9 PC Card ButtonPress to display a slide from the flash memory card inserted in the PC cardslot of your projector. (You must first install the optional LT Viewer boardinto your projector.)10 Menu ButtonUse this button to call up the On-Screen Menu so you can adjust and setthe image. After you press this button, it will light up. During this timeyou can use the mouse pointer and right/left click buttons to makemenu selections. If no buttons are pressed within 10 seconds the menuturns off.INTRODUCTION 26