NEC MultiSync M700 User Manual

Also see for MultiSync M700: User manual User manual Installation guide Setup guide

NEC MultiSync M700 User Manual Manual pdf 11 page image

Safety Precautions and MaintenanceFOR OPTIMUM PERFORMANCE, PLEASE NOTE THEFOLLOWING WHEN SETTING UP AND USINGTHE MULTISYNC® M700 ™ COLOR MONITOR:• DO NOT OPEN THE MONITOR. There are no user serviceable parts inside andopening or removing covers may expose you to dangerous shock hazards or otherrisks. Refer all servicing to qualified service personnel.• Do not spill any liquids into the cabinet or use your monitor near water.• Do not insert objects of any kind into the cabinet slots, as they may touch danger-ous voltage points, which can be harmful or fatal or may cause electric shock, fireor equipment failure.• Do not place any heavy objects on the power cord. Damage to the cord maycause shock or fire.• Do not place this product on a sloping or unstable cart, stand or table, as themonitor may fall, causing serious damage to the monitor.• Keep the monitor away from high capacity transformers, electric motors and otherdevices such as external speakers or fans, which may create strong magneticfields.• If possible, position the monitor so that it is facing the east to minimize the effectsof the earth’s magnetic field.• Changing the direction of the monitor while it is powered on may cause imagediscoloration. To correct this, turn the monitor off for 20 minutes before poweringit back on.Immediately unplug your monitor from the wall outlet and refer servicing to qualifiedservice personnel under the following conditions:• When the power supply cord or plug is damaged.• If liquid has been spilled, or objects have fallen into the monitor.• If the monitor has been exposed to rain or water.• If the monitor has been dropped or the cabinet damaged.• If the monitor does not operate normally by following operating instructions.• Allow adequate ventilation around the monitor so that heat can properlydissipate. Do not block ventilated openings or place the monitor near aradiator or other heat sources. Do not put anything on top of monitor.• The power cable connector is the primary means of detaching the systemfrom the power supply. The monitor should be installed close to a poweroutlet which is easily accessible.• Handle with care when transporting. Save packaging for transporting.Recommended UseCAUTION915500291.wpc 7/27/99, 3:41 PM11