NEC MultiSync MD21GS-2MP Installation And Maintenance Manual

Also see for MD21GS-2MP-BK-BB: Brochure & specs Specifications

Contents

NEC MultiSync MD21GS-2MP Installation And Maintenance Manual Manual pdf 6 page image

5User ControlsThe On-Screen Manager (OSM) control buttons are located on the back of the display. To access the OSM menu, pressany of the user control buttons ( < , >, –, +).1. LED Indicates power on and signal condition. The LED can be turned on, off, or dimmed. Pleaserefer to the Advanced OSM section/LED Brightness for further information.Green – signal is present and power is onOrange – no signal2. RESET Resets the highlighted control menu to the factory setting.3. SELECT Enters the OSM controls and OSM sub menu.Changes signal input.4/5. ADJUST -/+ Moves the bar left/right to increase or decrease the adjustment.6/7. CONTROL Moves the highlighted area left/right to select control menus.Moves the highlighted area up/down to select one of the controls.8. EXIT Exits the OSM Controls and OSM Main Menu.9. Sensor Port For optional external sensor used for self calibration and copy calibration.10. On-Screen The key guide will automatically appear on the screen when any control button on theKey Guide back is pressed. The key guide will change orientation along with the OSM.NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear allowing you to cancel theRESET function by pressing the EXIT button.Portrait ModeLandscape Mode