NEC MultiSync MT1055 User Manual

Also see for LCDMT1050: Installation data Installation data Installation data

Contents

NEC MultiSync MT1055 User Manual Manual pdf 13 page image

E – 10Remote Control FeaturesNOTE: If you are using a Macintosh computer, you can click either the right-click or left-click button to activate the mouse.NOTE: If any one of the buttons is pressed and held for 60 seconds or more,the button operations will cease to operate. This is not a malfunction, rather itis a feature used to prolong battery power. To cancel this feature, press any oneof the buttons other than the Mouse button.1. Infrared TransmitterDirect the remote control toward the remote sensor on the projectorcabinet.2. Laser PointerBeams a laser light when "Laser" button is pressed.3. LEDFlashes when any button is pressed.4. Power On ButtonIf the main power is applied, you can use this button to turn your pro-jector on.5. Power Off ButtonIf the main power is applied, you can use this button to turn your pro-jector off.NOTE: To turn off the projector, press and hold the POWER OFF button for aminimum of two seconds.6. Video ButtonPress this button to select an NTSC, PAL, SECAM or NTSC4.43 com-patible video source from a VCR, DVD player, laser disc player or docu-ment camera.7. S-Video ButtonPress this button to select an S-Video source from a VCR.8. RGB 1 ButtonPress this button to select a video source from computer or compo-nent equipment connected to your RGB 1 port.9. RGB 2 ButtonPress this button to select a video source from computer or compo-nent equipment connected to your RGB 2 port.10. Auto Adjust Button (RGB only)Press this button to automatically adjust the vertical/horizontal posi-tion, clock frequency/phase and resolution if the projected picture isnot centered, if there are vertical stripes on the picture or if the pictureis flickering.11. PJ ButtonPress this button to switch the Mouse, Cancel/Right Click, and Enter/Left Click buttons between the Projector mode (lit red) and the Com-puter mode. Press this button or any one of the Menu, Help, Pointer,PC Card, Folder List or Slide List buttons to switch to the Projectormode and the PJ button lights red. To switch back to the Computermode, press the PJ button again.12. Laser ButtonPress and hold this button to activate the laser pointer. When lit, youcan use the laser to draw your audience's attention to a red dot thatyou can place on any object.13. Menu ButtonDisplays the menu for various settings and adjustments.14. Mouse (stß ©) / (+) (–) ButtonWhen you are in the Computer mode, these buttons work as a com-puter mouse.When you are in the Projector mode, which is indicated by lighting thePJ button:st: Use these buttons to select the menu of the item you wish toadjust.ß ©: Use these buttons to change the level of a selected menu item.A press of the © button executes the selection.When the pointer is displayed, these stß © buttons move thepointer.12KEYSTONEFREEZEPIC-MUTEHELP POINTER PC CARDVIDEO S-VIDEO AUTO ADJ.RGB 1MENU LASERR-CLICK /CANCELRGB 2 PJONOFFMAGNIFYVOL.SLIDEFOLDERSLIDELIST3541011*12968713*14