NEC MultiSync P243W User Manual

English-88. Turn on the monitor by pressing the power button and then the computer (Figure E.1).9. When using analog (VGA) input, No Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initialsetup. For further adjustments, use the following OSD controls:• AUTO CONTRAST• AUTO ADJUSTRefer to the Controls section of this User’s Manual for a full description of these OSD controls.NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.Figure E.1Power ButtonRaise and Lower the Monitor ScreenThe monitor can be raised or lowered in either Portrait or Landscape mode.To raise or lower screen, place your hands on each side of the monitor screen and lift or lower to the desired height(Figure RL.1).CAUTION: Handle with care when adjusting the monitor screen. Do not apply pressure to the LCD panel when adjusting theheight and rotating the monitor screen.Figure RL.1Screen RotationCAUTION: Before rotating, disconnect the power cord and all cables from the display, raise the screen to the highest leveland adjust to maximum tilt to avoid knocking the screen on the desk or pinching your fingers.To raise the screen, place your hands on each side of the monitor screen and lift up to the highest position (Figure RL.1).To rotate the screen, place your hands on each side of the monitor screen and turn it clockwise from Landscape to Portrait orcounter-clockwise from Portrait to Landscape (Figure R.1).To rotate the OSD menu between landscape and portrait, refer to the “Controls” section.Figure R.1