NEC MultiSync P702 User Manual

Also see for MultiSync P702: Specifications Control guide Specifications Manual Manual

NEC MultiSync P702 User Manual Manual pdf 17 page image

English-15EnglishConnectionsNOTE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in aloss of the monitor image.NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound.Before making connections:* First turn off the power of all the attached equipment and make connections.* Refer to the user manual included with each separate piece of equipment.Wiring DiagramDVD playerwith HDMI out DVD playerVCR orDVD PlayerStereo AmplifierSecond monitor*Computer (Digital)DVD player withSCART OUTComputer (Analog)*: Multiple monitors that are daisy-chained have a limit to the connectable monitors.NOTE: Solid lines = video signal. Dotted lines = audio signal.ConnectedequipmentConnectingterminal Setting in Terminal Mode Input signal name ConnectingAudio terminalInput buttonin remote controlAVDVI (DVI-D) DVI MODE: DVI-HD DVI AUDIO IN1, IN2, IN3 DVIHDMI RAW/EXPAND*1 HDMI HDMI HDMI5BNC+VIDEO BNC MODE: SCART SCART AUDIO IN1, IN2, IN3 DVD/HDVIDEO1 (BNC) - VIDEO1 AUDIO IN1, IN2, IN3 VIDEOS-VIDEO - S-VIDEO AUDIO IN1, IN2, IN3 S-VIDEOVIDEO2 (5BNC) BNC MODE: VIDEO VIDEO2 AUDIO IN1, IN2, IN3 VIDEODVD/HD (5BNC) BNC MODE: COMPONENT DVD/HD AUDIO IN1, IN2, IN3 DVD/HDPCVGA (D-Sub) - VGA AUDIO IN1, IN2, IN3 VGADVI (DVI-D) DVI MODE: DVI-PC DVI AUDIO IN1, IN2, IN3 DVIRGB/HV (5BNC) BNC MODE: RGB RGB/HV AUDIO IN1, IN2, IN3 RGB/HVDisplayPort - DPORT - DISPLAYPORTHDMI RAW/EXPAND* 1 HDMI HDMI HDMI*1: depend on signal type.• AUDIO IN 1, 2 and 3 can be used for audio input. To select audio source [IN1], [IN2] or [IN3] in AUDIO INPUT in OSD menuor press the AUDIO INPUT button (remote control).