NEC MultiSync P750 User Manual

Also see for MultiSync P750: User manual User manual

NEC MultiSync P750 User Manual Manual pdf 13 page image

decrease the adjustment or selects the color setting (1 through 5).Reset: Resets the current color setting to the factory setting.NEC’s AccuColor® control system allows you to change your on-screen colors by adjusting the monitor’s red, green and blue colorguns individually. You can also access five industry standardcolor temperature settings.Geometry ControlsGeometry Controls MenuThe Geometry controls allow youto adjust the curvature or angle ofthe sides of your display.Sides In/Out (pincushion): Increasesor decreases the curvature of thesides either inward or outward.Sides Left/Right (pincushion balance): Increases or decreases thecurvature of the sides either to the left or right.Sides Tilt (parallelogram): Increases or decreases the tilt of thesides either to the left or right.Sides Align (trapezoidal): Increases or decreases the bottom ofthe screen to be the same as the top.Rotate (raster rotation): Rotates the entire display clockwise orcounterclockwise.Note on Controls in the Geometry Controls Menu:Exit: Exits to the main menu.Cursor / : Moves the highlighted area up/down to selectone of the choices.Cursor +/–: Moves the bar in the + or – direction to increase ordecrease the adjustment.Reset: Resets the current highlighted control to the factory setting.Tools 1Provides a list of optional adjustments which include the following:Language: OSM™ controls menus are available in 6 languages.OSM Position: You can choose where you would like the OSMcontrols image to appear on your screen. Selecting OSM Positionallows you to manually adjust the OSM controls menu left, right,up or down.OSM Turn Off: The OSM controls menu will stay on as long as itis in use. In the OSM Turn Off sub-menu, you can select howlong the monitor waits after the last touch of a button to shut offthe OSM controls menu. The preset choices are 10, 20, 30, 60,120 seconds.OSM Lock Out: This control completely locks out access to all OSMcontrols functions. When attempting to activate OSM controls while11Controls