NEC MultiSync PA231W User Manual

Also see for MultiSync PA231W: Specification Specifications Specifications User manual User manual

English-35English6. The procedure will ask for the USB color sensor to be placed on the center of the display panel (Figure S.3). Tilt the displaypanel approximately 5˚ backward and place the USB color sensor in the center of the display panel (Figure S.1).NOTE: Place the USB color sensor fl at against the LCD to avoid external light contamination. DO NOT press the calibratoragainst the display panel.Press “SELECT” to start the calibration. Stand-alone calibration may take several minutes depending on user settings.Figure S.37. After the CALIBRATION SUCCEEDED message appears (Figure S.4), press SELECT.8. To end the calibration mode, press “EXIT”.Figure S.4