NEC MultiSync SC40 User Manual

Also see for MultiSync SC40: Specifications Brochure Brochure Brochure Features and benefits

NEC MultiSync SC40 User Manual Manual pdf 22 page image

English-163) Connect external equipment.To protect the external equipment, turn off the mainpower before making connections.Refer to your equipment user manual for furtherinformation.4) Connect the supplied power cord.The equipment should be installed close to an easilyaccessible power outlet.Please attach power cord to the LCD monitor byattaching the screw and clamp.Fully insert the prongs into the power outlet socket. Aloose connection may cause image degradation.NOTE: If you use this monitor at AC 220 - 240V,please refer to “Safety Precautions and Maintenance &Recommended Use” sections of this manual for properselection of AC power cord.5) Switch on the power of all the attachedexternal equipment.When connected with a computer, switch on the powerof the computer first.6) Operate the attached external equipment.Display the signal from the desired input source.•••••7) Adjust the soundMake volume adjustments as required.8) Adjust the screen See page 26.Make adjustments of the screen display position whennecessary.9) Adjust the image See page 26.Make adjustments such as brightness or contrast whenrequired.10) Recommended AdjustmentsTo reduce the risk of the “image persistence”, pleaseadjust the following items based on the applicationbeing used:“DATE & TIME” and “SCHEDULE SETTINGS”See pages 27 and 28.“SCREEN SAVER”, and “SIDE BORDER COLOR”See page 29.It is recommended that the “FAN CONTROL”setting be turned to ON also. See page 30.Setup - continuedScrew ClampScrewhole for Clamp