NEC MultiSync V323 User Manual

NEC MultiSync V323 User Manual Manual pdf 20 page image

English-18Information OSDThe Information OSD provides information such as: Monitor ID, Input Source, Picture Size, etc.Press the DISPLAY button on the remote to bring up the Information OSD. ID number assigned to current monitor*1 ID number assigned monitor to be controlled via RS-232C*2 Input Name Audio input mode Picture aspect Input Signal Information Sub picture information*1: “IR CONTROL” should be set “Primary” or “Secondary”.*2: “IR CONTROL” should be set “Primary”.Picture ModeDVI, VGA, DPORTSTANDARD sRGB AMBIENT1 AMBIENT2 HIGHBRIGHTHDMI, DVD/HD, SCART, VIDEO1, VIDEO2, S-VIDEOSTANDARD CINEMA AMBIENT1 AMBIENT2 HIGHBRIGHTAMBIENT ModeThe backlight of the LCD screen can be set to increase or decrease depending on the amount of ambient light within the room.If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly. Thepurpose of this function is to make the viewing experience more comfortable to the eye in a variety of lighting conditions.NOTE: When picture mode is set to AMBIENT1 or AMBIENT2, BACKLIGHT, AUTO BRIGHTNESS and BACKLIGHT inSCREEN SAVER function are disabled.Do not cover Ambient light sensor when you use AMBIENT1 or AMBIENT2 in PICTURE MODE.AMBIENT parameter settingPICTURE MODE in OSD, select AMBIENT1 or AMBIENT2 and set IN BRIGHT and IN DARK in each mode.IN BRIGHT: This is the backlight level that the monitor will go up to when the ambient light level is highest.IN DARK: This is the level of backlight that the monitor will go down to when the ambient light level is low.When the AMBIENT function is enabled the Backlight level of the screen changes automatically according to the lightingconditions of the room (Figure 1).BACKLIGHT level setfor the monitor to usewhen ambient lightinglevel is low.BACKLIGHT level set for themonitor to use when ambientlighting level is high.BACKLIGHT rangeFigure 1dark brightroom bright conditionScreen Backlight value by AMBIENT2 modeIN DARK IN BRIGHTScreen Backlight value by AMBIENT1 modeFactory SettingIN DARK: BACKLIGHT level set for the monitor to use when ambient lighting level is low.IN BRIGHT: BACKLIGHT level set for the monitor to use when ambient lighting level is high.