NEC MultiSync X461UNV User Manual

Also see for MultiSync X461UNV: Specifications Installation and assembly User manual Specifications Specifications

NEC MultiSync X461UNV User Manual Manual pdf 16 page image

English-14• AUDIO IN 1, 2 and 3 can be used for audio input. To select audio source [IN1], [IN2] or [IN3] in AUDIO INPUT in OSDmenu or press the AUDIO INPUT button (optional remote control).ConnectionsNOTE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in aloss of the monitor image.NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound.Before making connections:* First turn off the power of all the attached equipment and make connections.* Refer to the user manual included with each separate piece of equipment.Wiring DiagramDVD playerwith HDMI out DVD playerVCR or DVDPlayerStereo Amplifier Second monitor*Computer (Analog) Computer (Digital)DVD player withSCART OUTConnectingterminalDVD/HD1 (3RCA)DVI (DVI-D)HDMIDVD/HD+VIDEOVIDEO1 (BNC&RCA)S-VIDEOVIDEO2 (5BNC)DVD/HD2 (5BNC)VGA (D-Sub)DVI (DVI-D)RGB/HV (5BNC)DisplayPortSetting in Terminal Mode-DVI MODE: DVI-HDRAW/EXPAND* 1SCART: ON--BNC MODE: VIDEOBNC MODE: COMPONENT-DVI MODE: DVI-PCBNC MODE: RGB-Input signalnameDVD/HD1DVIHDMISCARTVIDEO1S-VIDEOVIDEO2DVD/HD2VGADVIRGB/HVDPORTConnectingAudio terminalAUDIO IN1, IN2, IN3AUDIO IN1, IN2, IN3HDMIAUDIO IN1, IN2, IN3AUDIO IN1, IN2, IN3AUDIO IN1, IN2, IN3AUDIO IN1, IN2, IN3AUDIO IN1, IN2, IN3AUDIO IN1, IN2, IN3AUDIO IN1, IN2, IN3AUDIO IN1, IN2, IN3DPORTInput buttonin remote controlDVD/HDDVIHDMIDVD/HDVIDEOS-VIDEOVIDEODVD/HDVGADVIRGB/HVDISPLAYPORTConnectedequipmentAVPC*1: depend on signal type.*: Multiple monitors that are daisy-chained have a limit to the connectable monitors.