35123456123456123456123456123456123456 SPECIFICATIONS.rojection type ................. Refraction typeProjector and screen are separatedProjection system .......... 3 lens and 3 CRTs in-lineScanning frequency ....... (XG-1351/XG-1351G)H 15 to 135 kHz/V 40 to 160Hz(XG-1101/XG-1101G)H 15 to 110 kHz/V 40 to 160Hz(XG-751/XG-751G)H 15 to 75 kHz/V 40 to 160HzRetrace time .................. H 6.0 μS (fH 15 to 30kHz)H 2.6 μS (fH 30 to 77kHz)H 2.0 μS (fH 77 to 120kHz)H 1.4 μS (fH 120 to 135kHz)V 270 μSVideo bandwidth ............ 150MHz (-3dB) XG-1351/XG-1351G120MHz (-3dB) XG-1101/XG-1101G110MHz (-3dB) XG-751/XG-751GCRT ............................... 8 inch liquid cooledDeflection angle 90 degreesLens .............................. Hybrid lens with ECP and ARC , F1.1HD-18: XG-1351/XG-1351G/XG-1101/XG-1101GHD-144N: XG-751/XG-751G(ECP: Enhanced Color Purity, except B-lens/ARC:Anti-Reflective Coating)Picture size .................... 60 to 300 inches diagonalResolution ..................... 1500TV lines at center (HDTV)1350TV line at corner (HDTV)Pixel resolution .............. 250022000 dots (Addressable)(XG-751/XG-751G: 160021200 dots )Light output ................... 240 ANSI lumens (XG-1351/XG-1351G/XG-1101/XG-1101G), 230 ANSI lumens (XG-751/XG-751G)High voltage .................. 32kVInput .............................. RGB signal 0.7Vp-p 75 ohm positive (BNC)H/V sync 0.7 to 4.0Vp-p 75 ohm/High Z negativeor positive (BNC)COMP sync 0.7 to 4.0Vp-p 75 ohm/High Znegative or positive (BNC)Sync on G 0.3 to 0.6Vp-p 75 ohm negative (BNC)COMP Video 1.0Vp-p 75 ohm positive (BNC)S-video: Y 1.0Vp-p 75 ohm positiveC 0.28Vp-p 75 ohm (burst level)Video system NTSC, PAL, SECAM and NTSC4.43Convergence .................. Digital convergence (Pre-set 100 positions)Quick copy convergenceStatic and wave convergencePoint convergence, Zone convergenceConvergence limits ........ Less than 0.2% of V-heightWarm up time ................ 20 minutesSetup signal ................... Cross hairs, Cross hatch, Dot, Window Pattern, Htest patternPower supply ................. AC 120V 60Hz (XG-1351/XG-1101/XG-751)AC 220-240V 50Hz (XG-1351G/XG-1101G/XG-751G)Power consumption ...... 750W (XG-1351/XG-1101), 690W (XG-751)730W(XG-1351G/XG-1101G), 660W (XG-751G)Input current ................. 6.7A (AC 120V)XG-1351/XG-11016.2A (AC 120V)XG-7513.4A (AC 220-240V)XG-1351G/XG-1101G3.1A (AC 220-240V)XG-751GSafety and regulation XG-1351/XG-1101/XG-751;Meets FCC class A requirementsUL Approved (UL 1950, CSA 950)DHHS ApprovedMeets DOC (Canada)Meets RED ACTXG-1351G/XG-1101G/XG-751G;Meets EMC Directive (EN55022,EN61000-3-2,EN61000-3-3, EN50082-1)Meets Low Voltage Directive (EN60950, TÜVGS Approved)PTB ApprovedCabinet dimensions ....... 610(W)X812(D)X325(H) mm24.02(W)X31.97(D)X12.80(H) inchWeight ........................... 63.0 kg/139.0 lbs(XG-751/XG-751G)67.4 kg/148.7 lbs (XG-1351/XG-1351G/XG-1101/XG-1101G)Remote control .............. Wired applicationWireless (operating distance 7m/23ft.)Remote control functions ..... User remote (RC-6320); Power ON/OFF, Inputsignal select, Picture mute, Bright, Contrast, Color1) , Sharpness 1) , Tint 2) , Volume 3) , Sound mute 3) ,Source information, Static convergence, Normal-ize, Enter, End, Closed CaptionFull function remote (RC-6321); Test, Display, Help,Information, Input list, Static focus, Edge focus, H/V position, White balance select, Static conver-gence, Wave convergence, Point convergence, H/Vamplitude, H/V linearity, H/V key-stone, H/V pin-cushion, H/V blanking, Tilt, Skew, H/V bow, Store,Normalize, Enter, EndMain control function .... Power ON/OFF, Input signal select,External control ............. Power ON/OFF, Input signal select, Picture mute,Sound mute 3) , Remote control data inputPC control ..................... AcceptableSupplied accessories ..... Full function remote control unit (RC-6321), Userremote control unit (RC-6320), Remote cable16m/52ft., AC line cable, Terminal cover,Operation manual, Set-Up manual*, Installationmanual*Environment .................. Temperature 0 to 40 degrees CHumidity 0 to 90% non-condensingStorage -10 to 50 degrees CSound emission ............. XG-1351/XG-1101/XG-751 less than 45dBXG-1351G/XG-1101G/XG-751G less than 70dB(A). Complies with ISO 3744 or ISO 77791) This works only for VIDEO signals.2) This works only for NTSC video signals.3) This works only with the Switcher operation.Specifications are subject to change without notice.The dimensions given for the projector do not includeprotruding parts.*Set-Up manual and Installation manual are not includedwith XG-751G/XG-1101G/XG-1351G.