NEC MultiSync XG1352 User Manual

Also see for MultiSync XG-1352: Operation manual Manual

Contents

NEC MultiSync XG1352 User Manual Manual pdf 52 page image

73SETTINGDefault Input SelectionYou can set the projector to default to any one of its inputs each timethe projector is turned on.Proceed as follows:1 Press the ADJUST button to display the “ADJUST” menu.• The projector may ask you to enter your passcode.See page 61 for the explanation of the PASSCODE.2 Use the CURSOR or button to highlight the “8/OPTION”line. Press ENTER to display the “OPTION” menu. You can alsoselect the “OPTION” menu directly by pressing the INPUT “8”button.3 Use the CURSOR or button to highlight the “1/SETTINGMODE” line. Press ENTER to display the “SETTING MODE”menu. You can also select the “SETTING MODE” menu directlyby pressing the INPUT “1” button.4 Use the CURSOR or button to select the “DEFAULTINPUT SELECT” item, then press ENTER to display the“DEFAULT INPUT SELECT” menu.NOTE: The SETTING MODE has three menus. The “DEFAULTINPUT SELECT” item is on the first menu (P01). To access P02or P03 from P01, press and hold down the CTL button thenpress the button; to return to P01 from P02 or P03, pressand hold down the CTL button then press the button.– A D J U S T –1 / S I G N A L E N T R Y2 / F O C U S3 / A L I G N M E N T4 / C O N V E R G E N C E5 / K E L V I N6 / R , G , B G A I N7 / P A S S C O D E8 / O P T I O N9 / R E F . A D J U S TP01/P03 OPTION – SETTING MODE –CONNECT CONDITIONCEILINGFRONTDEFAULT INPUT SELECTFOCUS EDGE MODE ALLS-VIDEO MODE SELECT S2VIDEO MODE SELECT AUTOSTANDALONELASTPJ ORIENTATION– O P T I O N –1 / S E T T I N G M O D E2 / M E N U M O D E3 / S E Q U E N C E R4 / P J A D D R E S S5 / V E R S I O N6 / H O U R M E T E R7 / D E F A U L T D A T A