NEC N600i User Manual

Also see for N600i: User guide Manual

Contents

NEC N600i User Manual Manual pdf 45 page image

39N600i provides you with the functions of Bluetooth,Synchronisation and Flash memory as anexternal connection.Bluetooth®Using this function allows you to connect an externalBluetooth supported device to N600i. The followingservices are available:• Dial-up connectionConnecting N600i to a PC via Bluetooth technologyenables the PC to use N600i just like a modem toestablish a dial-up connection to an Internet serviceprovider.• Data transfer (Only one phonebook data is available.)You can transfer the phonebook data to anotherBluetooth device such as PC, PDA and N600i.• Headset/handsfree connectionYou can make/receive a call using a Bluetooth headsetor handsfree kit2Data transfer is performed as follows:• For sending data from N600i1. Select the phonebook data to be sent on your N600i.2. Search the available device and select the target.3. Bluetooth connection is established4. Data transfer starts.• For receiving a phonebook data on N600i1. Select Discoverable (see the next section) to setyour N600i to standby mode2. Data is sent from the target device.3. The save confirmation screen appears.4. Press YES (SK1 key) to save the transferred datainto phonebook.To use a Bluetooth device☛ 7, or select 7 (External connection) to pressthe Enter key on the Menu screen, and Bluetooth toopen or close connection for the Bluetooth devices.☛ Press Options and the following menus are available.No Bluetooth1 Discoverable Sets standby mode for connectionfrom an external device.2 NEC Head-setConnects or disconnects to/from NECheadset. This menu appears afterregistration.3 My PC Connects or disconnects to/from aPC.This menu appears after registration.4 HandsfreekitConnects or disconnects to/from ahandsfree kit. This menu appearsafter registration.No Options1 Information Displays information on the selecteddevice.2 Search Searches for nearby Bluetooth devicesto register.3 PairingstandbyChanges the handset status to bondingwait status in which the handset waitsfor the authentication from otherdevices in order to register the devices.4 TerminalInfo.Displays the Bluetooth information ofthe handset. The device name can beedited, in which case, the edited devicename is displayed at the other party'sBluetooth device.5 RemovedeviceDeletes the registered devices from thelist.6 Stop all Disconnects all Bluetooth connections.External connection (M7)☛ 7, or select7 (Externalconnection) topress the Enterkey on the Menuscreen.