2. Installation and ConnectionExpress5800/GT110e-S User’s Guide 113Chapter 2 PreparationsDo not install the server in an environment in which any of the following conditions apply: Installing the serverin any of the following conditions will cause the server to malfunction.Place of drastic temperature change(near a heater, air conditioner, orrefrigerator).Place where a carpet not subject toanti-static process is laid.Place where the power cord of theserver must be connected to an ACoutlet that shares the ground wire withanother outlet where another devicewith large power consumption isconnected.Place where intense vibration may begenerated.Place where some objects may befallen.Place near a device generating intensemagnetic field (such as TVs, radios,broadcast/communication antennas,power transmission wires, andelectromagnetic cranes) is placed.Places where corrosive gas is present(environments where there is sulfurvapor in the atmosphere), or placeswhere chemicals are nearby or may beaccidentally sprayed over.Places where the power cords orinterface cables might be stepped on ortripped over.Do not install where there is powersupply noise nearby (such as contactsparks when turning power on or offduring power relays). (If you must installthe server close to such equipment,have your maintenance servicecompany separate power cables orinstall noise filter.)
