NEC N8104-178 Startup Manual

Also see for N8104-178: User guide User guide

Contents

NEC N8104-178 Startup Manual Manual pdf 38 page image

E-132. Hardware Installation/UninstallationFor hardware installation/uninstallation, refer to the User’s Guide of the server.IMPORTANT:-When the system is up, please turn the power off after shutdown process on the OS. andthen unplug the AC power cord-For rack-type server, before open the top cover, need to disconnect the cable from thisproduct.Unplug all power cordsTurn the power off and unplug the power before removing the computer's cover. Failureto do so could endanger you and may damage the adapter or computerAvoid installation in extreme temperature conditions.Immediately after the server is powered off, its internal components such as heat sink are very hot.Leave the server until its internal components fully cool down before installing/removing anycomponent.Ground yourself to dissipate any static charge before handling the adapter.To prevent any damage on components due to static electricity, make sure to dischargestatic electricity from yourself before you touch N8104 adapter.Don’t touch uncoated metal parts on adapter.Never touch N8104 adapter’s LAN port, terminals of components or uncoated metalparts on adapter. Otherwise, taint, erosion or others may cause loose connection. Donot touch this product with wet or dirty hands.Excessive force could break the connector.On installing this adapter, do not insert it by force. Otherwise, N8104 adapter and theserver may be damaged.Don’t touch the tip of bracket to other parts of serverWhen you insert N8104 adapter into expansion slot, be careful not to touch the tip ofbracket to other parts of server (such as other components or board). Otherwise, theymay be damaged.Firmly connect the network cableWhen connecting the cable, insert the cable connector until you hear a click sound.