NEC N922E Operating Instruction

Contents

NEC N922E Operating Instruction Manual pdf 8 page image

7The oven light will come on only when themicrowave oven is operating.The oven door can be opened at any timeduring operation by touching the door releasebutton on the control panel. The oven willautomatically shut off.Each time a pad is touched, a BEEP will soundto acknowledge the touch.The oven automatically cooks on full powerunless set to a lower power level.The display will show “ : 0” when the oven isplugged in.Time clock returns to the present time when thecooking time ends.When the STOP/CLEAR pad is touched duringthe oven operation, the oven stops cooking andall information retained.To erase all information(except the presenttime), touch the STOP/CLEAR pad once more.If the oven door is opened during the ovenoperation, all information is retained.If the START pad is touched and the oven doesnot operate, check the area between the doorand door seal for obstructions and make sure thedoor is closed securely.The oven will not start cooking until the door iscompletely closed or the program has been reset.OPERATION PROCEDUREThis section includes useful information about oven operation.1. Plug power supply cord into a 240V 50Hz power outlet.2. After placing the food in a suitable container, open the oven door and put it on the glass tray.The glass tray and roller guide must always be in place during cooking.3. Shut the door. Make sure that it is firmly closed.12345678Make sure the oven is properly installed andplugged into the electrical outlet.WATTAGE OUTPUT CHART• The power-level is set by pressing the POWER pad. The chart shows the display, the power leveland the percentage of powerTouch POWER pad Power level (Display) Approximate Percentage of Poweronce P-HI 100%twice P-90 90%3 times P-80 80%4 times P-70 70%5 times P-60 60%6 times P-50 50%7 times P-40 40%8 times P-30 30%9 times P-20 20%10 times P-10 10%11 times P-00 0%