NEC NC1040L-A User Manual

Contents

NEC NC1040L-A User Manual Manual pdf 57 page image

574. Using MenusLight UnitDisplays the software version of the laser unit.← Displays the version information.4-6-6. IP AddressDisplays the IP address set in the projector.← Displays the IP address.System Displays the IP address set for the projector (System).4-6-7. Setup DateDisplays the date when the projector was set up (starting date of the warranty period).← Displays the date when the projector was set up (starting date of the warrantyperiod).4-6-8. Option StatusDisplays the link status of the device mounted in the slot on the projector. The device name is displayed in ( ) when the projectoris in standby mode or when connection to the device cannot be confirmed.← Displays the link status of the device in slot B.← Displays the link status of the device in slot A.BDisplays the link status of the device in slot A or slot B.• IMB: Media block (NP-90MS01)• NC-80LB: Signal input board (NC-80LB01-B)• NC-80DS01: Signal input board (NC-80DS01-B)• NP-80DS02: Signal input board (NP-80DS02)• No Board: No device mountedA