E-365.LCD MenuThis chapter describes the menus displayed in the LCD screen on the projector’s controlpanel and their functions. For basic operations of menus, refer to the operation manual.The list of menu is shown in “5.2. List of menu” (See next page).5.1 When you use the service personnel menuTo use the menu for service personnel, you need to input the pass code from the remotecontroller.[1] Press the TEST button while holding down the CTL button of theremote controller.The pass code input screen will be displayed on the LCD screen at the projector’s control panel.[2] Enter your pass code using the numeric character keys of theremote controller.After authentication of your pass code, the service personnel menu will become active.
