NEC NDH-81 Owner's Manual
Also see for NDH-81: Owner's manual
                                                         | |
Contents
| 
16General Settings (Continued)Manual Clock Set1. Select [Clock set] option then press B.2. Enter the necessary information for date and time.b / B (left/right): Moves the cursor to the previousor next column.v / V (up/down): Changes the setting at thecurrent cursor position.3. Press ENTER to confirm your setting.TV AspectSelects the aspect ratio of the connected TV (4:3standard or wide). [4:3] Select this when connecting to a 4:3 screenTV. When you select [4:3], set [Display Mode]below. [16:9] Select this when connecting to a wide-screenTV or TV with a wide mode function.Display ModeSelects how to display a wide picture on the screenwhen [4:3] is selected in [TV Aspect]. [Letter Box] Displays a wide picture with bands onthe upper and lower portions of the screen. [Pan Scan] Automatically displays a wide picture onthe entire screen and cuts off the portions that donot fit.Progressive ScanProgressive Scan Video provides the highest qualitypictures with less flickering.If you are using the COMPONENT/PROGRESSIVESCAN VIDEO OUT jacks, but are connecting therecorder to a standard (analog) television, setProgressive Scan to [OFF].If you are using the COMPONENT/PROGRESSIVESCAN VIDEO OUT jacks for connection to a TV ormonitor that is compatible with a progressive scansignal, set Progressive Scan to [ON].CautionOnce the setting for Progressive Scan output isentered, an image will only be visible on aProgressive Scan compatible TV or monitor. If you setProgressive Scan to [ON] in error, you must reset therecorder. First, remove the disc in the recorder. Next,press STOP (x) and hold it for five seconds beforereleasing it. The video output will be restored to thestandard setting, and a picture will once again bevisible on a conventional analog TV or monitor.Power Save ModeYou can set up the unit into an economic power savemode. Nothing is displayed in the display windowwhen the unit is turned off. [OFF] Power Save Mode is not active. [ON] Power Save Mode is active.InitializationYou can reset the recorder to its original factorysettings and initialize the HDD. [Factory Set] If you need to, you can reset therecorder to all its factory settings. Some optionscannot be reset. (Rating, Password, and AreaCode) [HDD format] Initializes the HDD (Hard Disk Drive):everything recorded on the HDD will be erased.1. Select [Initialize] option then press B.2. Press v / V to select the desired option then pressENTER.The confirm message will appear.3. Use b / B to select [Yes] or [No] then pressENTER. |
Related manuals for NEC NDH-81
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine