NEC NDV-24 Owner's Manual
                            | |
Contents
| 
Connections (Continued)Connecting to Optional EquipmentConnecting to an amplifier equipped with twochannel analog stereo or Dolby Pro Logic ll/Pro LogicConnect the Left and Right AUDIO OUT jacks on theDVD Player to the audio left and right in jacks on youramplifier, receiver, or stereo system, using the audiocables (A).Connecting to an amplifier equipped with twochannel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channeldecoder (Dolby Digital™, MPEG 2, or DTS)11 Connect one of the DVD Player’s DIGITAL AUDIOOUT jacks (COAXIAL X) to the corresponding injack on your amplifier. Use an optional digital(coaxial X) audio cable.22 You will need to activate the player’s digital output.(See “Digital Audio Output” on page 13).Digital Multi-channel soundA digital multi-channel connection provides the bestsound quality. For this you need a multi-channelAudio/Video receiver that supports one or more of theaudio formats supported by your DVD Player (MPEG 2,Dolby Digital and DTS). Check the receiver manual andthe logos on the front of the receiver.Caution:Due to the DTS Licensing agreement, the digital outputwill be in DTS digital out when DTS audio stream isselected.Notes– If the audio format of the digital output does not matchthe capabilities of your receiver, the receiver willproduce a strong, distorted sound or no sound at all.– Six Channel Digital Surround Sound via digital con-nection can only be obtained if your receiver isequipped with a Digital Multi-channel decoder.– To see the audio format of the current DVD in the on-screen display, press AUDIO.10Amplifier (Receiver)Rear of DVD playerAXR LAUDIO INPUTDIGITAL INPUTCOAXIAL |
Related manuals for NEC NDV-24
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine