NEC NDV-27 Owner's Manual
Also see for NDV-27: Specifications
                              | |
Contents
| 
18Initial Settings (continued)DISPLAYTV Aspect4:3: Select when a standard 4:3 TV is connected.16:9: Select when a 16:9 wide TV is connected.Display ModeDisplay Mode setting works only when the TV Aspect mode is set to“4:3”.LetterBox: Displays a wide picture with bands on the upper and lowerportions of the screen.Panscan: Automatically displays the wide picture on the entire screen andcuts off the portions that do not fit.Progressive ScanProgressive Scan Video provides the highest quality pictures with lessflickering. If you are using the Component Video jacks for connection toa TV or monitor that is compatible with a progressive scan signal, setProgressive Scan to On. Press ENTER to confirm your selection.The confirm menu will appear.CautionIf your TV does not accept the Progressive Scan format, the picture willappear scrambled if you try Progressive Scan on the DVD Player.If you set Progressive Scan to On in error, you must reset the unit.1) Press B. Select “Off” using the v / V buttons.The Setup menu appears.2) Press STOP and hold it for five seconds before releasing it. The videooutput will be restored to the standard setting and a picture will onceagain be visible on a conventional analog TV or monitor.DVDDVDTV Aspect 4:3LetterboxOffYPbPrDisplay ModeProgressive ScanTV Output SelectDISPLAYMove Select Exit |
Related manuals for NEC NDV-27
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine