NEC NEAX 2400 IPX User Manual

Also see for Dterm IP: User guide Technical specifications User guide User guide User guide

Contents

NEC NEAX 2400 IPX User Manual Manual pdf 46 page image

– 42 –To Place a Call on HoldPress Hold. Held line flashes.Note: If held line appears on other Dterm stations,the associated LED flashes red slowly.To retrieveLift handset or press Speaker.Press held line. Use handset to converse.Note: Any station with this line appearance can retrieve the call.If unansweredAfter preprogrammed time, Automatic Recall is initiated.Visual and audible signal (rapid flash and ring burst) is sent to station that placed call on hold.Note 1: A transfer or conference call may be placed on hold depending on software level of the NEAX2400 IPX.Note 2: Hold shows as a flashing green LED on your phone. The same line on other phones shows as a flashing redLED.Recall shows as a flashing green LED on your phone and flashing red LED on other phones with the same line.To Place a Call on Exclusive HoldPress Hold twice. Line appearance indicates interrupted wink.Note: If held line appears on other Dterm stations,LED remains steadily lit red.To retrieveLift handset or press Speaker.Press held line. Use handset to converse.Note: Only the Dterm that set Exclusive Hold option can retrieve the call.Held stationnumber4:26 PM TUE 13 APR 2004HOLD 2001Held stationnumber4:26 PM TUE 13 APR 2004E_HOLD 2001